Skip to content

Best PUBG Mobile Sensitivity Settings for ADS & Gyro (2024)

A 2024 PUBG Mobile settings guide built around aim: graphics and frame rate ceilings by device tier, reference sensitivity ranges for every scope, the three gyro modes and a repeatable way to test your own numbers.

Gamermir Editor
Published Nov 13, 2026Updated Nov 20, 2026

PUBG Mobile runs on Unreal Engine 4, and on a phone that engine spends its budget on draw distance, foliage and shadow passes — three things you cannot see while tracking a target through a 4x. So the graphics menu and the sensitivity menu pull against each other: the preset that looks best caps your frame rate, and the sensitivity that feels perfect in the training ground collapses at 150 m. This guide covers the 2024 version line (3.2 onward): copy the settings, then tune the ranges to your own hands.

Quick Settings Cheat Sheet

SettingRecommended valueWhy

Graphics

Smooth

Raises the frame ceiling; extra detail costs frames and hides targets

Frame rate

Highest tier your screen supports

A 60 Hz panel cannot show 90 or 120 fps

Graphics style

Colorful or Classic

Stronger silhouettes against grass and walls

Shadows

Off

Shadows are exactly where a prone player disappears

Auto Adjust Graphics

Off

Stops the game from overwriting your preset between matches

Gyroscope

Activate the scope

Gyro only while aiming keeps movement clean

ADS, red dot

30–70%

Low ADS stabilises sprays; high ADS forces constant corrections

If you only change one thing today, change the graphics preset. Everything else on this page is cheaper to fix than a frame cap.

Understanding PUBG Mobile's Performance

The graphics preset is the single biggest lever you have, because it decides which ceiling you hit first. HDR and Ultra HD push the GPU harder and lower the frame rate ceiling, so a phone that holds a steady 60 on Smooth can sit well under it on HDR. Smooth gives that headroom back, which is why competitive players still run it on flagship hardware.

The official floor is low: Android 5.1.1 and at least 2 GB of memory, with a lighter build offered for phones below that. High refresh is a separate gate. Since the 3.2 update, 90 and 120 fps are available only on selected devices, and the 90 tier additionally wants a 90 Hz-or-better display plus a Snapdragon 865 or Dimensity 1100 class CPU.

The tier table below is a working reference for how to read the rest of this guide, not an official classification:

TierReference hardwareRealistic target

Entry

3–4 GB RAM, 60 Hz panel, older mid-range chip

Smooth, 60 fps tier, gyro limited to scopes

Mid-range

6 GB RAM, 90 Hz panel, Snapdragon 865 or Dimensity 1100 class

Smooth, 90 fps tier

Flagship

8 GB or more, 120 Hz panel, recent flagship chip

Smooth, 120 fps tier on supported models

Long matches add a second enemy: heat. Once the phone throttles, frame time climbs even with the preset unchanged, and late-game fights are where that hurts most.

Best Graphics & Frame Rate Settings

The rule is simple. Buy frames with the preset, then spend them on the frame rate tier, and only then think about how the game looks. Detail is a luxury; visibility and a stable frame time are not.

SettingRecommended valueWhy

Graphics

Smooth

Highest frame ceiling of the five presets

Frame rate

Extreme, Extreme+ or Ultra Extreme

Pick the tier your panel and chip can hold, not the highest one listed

Graphics style

Colorful or Classic

Both lift enemy silhouettes against grass and structures

Shadows

Off

Removes the dark pockets players use as cover

Auto Adjust Graphics

Off

Prevents silent preset changes after a match or an update

The five presets in the 2024 version line are Smooth, Balanced, HD, HDR and Ultra HD. Anything above Balanced is a deliberate trade: better lighting and textures in exchange for a lower frame rate ceiling and more heat. That trade is fine for casual sessions and a mistake for ranked.

Frame rate tierTargetWho can select it

Extreme

60 fps

Most devices, provided Smooth holds steady

Extreme+

90 fps

90 Hz or higher display plus a Snapdragon 865 or Dimensity 1100 class CPU

Ultra Extreme

120 fps

Selected devices only, since version 3.2

Pro Tip: if Extreme+ or Ultra Extreme is greyed out, the graphics preset is almost always the cause. Both tiers require Smooth, so change the preset before you blame the phone.

Key Setting Deep Dives

Frame Rate Tiers: Two Separate Locks

The frame rate menu looks like a simple ladder, but two different locks sit on it. The first is the display: a 60 Hz panel tops out at the 60 tier no matter what chip is inside. The second is the graphics preset, which gates 90 and 120 behind Smooth.

This is why players on good hardware still see a greyed-out 90 option. Set Graphics to Smooth first, then reopen the frame rate row. If the option is still missing, the device is not on the supported list — the 90 tier needs both the refresh rate and the CPU class, and 120 has been limited to select devices since 3.2 rather than opened to every flagship.

Match the tier to what the phone can hold, not to what the menu allows. A locked 60 with a flat frame time beats a 120 setting that drops to 70 in a hot drop.

Device Tier and the Android–iOS Offset

Community sensitivity tables split Android and iOS, and the iOS column usually runs about 5 to 10 points lower on the same slider — a red dot ADS value of 30 against 28, a 4x value of 20 against 18. Treat that as a starting offset, not a rule; nobody has published a measured reason for it, and touch sampling differs per model anyway.

The more useful split is by device class. Flagships can take the top of every range and can justify Always On gyro once you have the muscle memory. Mid-range phones sit in the middle of each range and should stay on Scope On. Entry-level phones should take the bottom of each range and pull no-scope gyro down to roughly 250–280%, because low-end gyro sensors drift.

Gyroscope Mode: Scope On First

The game exposes three modes: Off, Activate the scope and Always on. Scope On only applies tilt while you are aiming down sights, so your movement and your camera stay under thumb control the rest of the time.

Start there. Always On is the stronger setting once it is trained, but it rewrites how you hold the phone, and switching to it before your aim is stable makes every fight feel random. If the gyro option is greyed out entirely, the device either has no gyro or only an accelerometer, and no sensitivity value will fix that.

Controls and Visibility: Camera, ADS and Gyro

Sensitivity is four panels, not one slider: Camera, ADS, Gyroscope and Gyroscope ADS. Each panel repeats the same scope list — TPP, FPP, Red Dot, Holo, 2x, 3x, 4x, 6x, 8x — so a full setup is dozens of numbers. The panels do different jobs, which is why copying one panel's value into another never works.

PanelWhat it controlsBehaviour

Camera

View speed when you are not aiming

Affects turning and tracking, not recoil

ADS

Crosshair speed while firing through sights

The main spray-control slider

Gyroscope

Tilt control of the view

Applies whenever gyro is active

Gyroscope ADS

Tilt control while firing through sights

Recoil compensation with your wrists

The ranges below assume the 400% slider cap. Values are reference ranges across community tables, not in-game defaults:

PanelScopeReference rangeTypical fight

ADS

Red Dot / Holo

30–70%

10–50 m, indoors and around cover

ADS

2x

26–55%

50–100 m

ADS

3x

23–40%

50–100 m

ADS

4x

18–30%

75–150 m

ADS

6x

12–23%

150–200 m

Gyroscope

No scope / Red Dot

280–400%

10–50 m

Gyroscope

3x

180–320%

50–100 m

Gyroscope

4x

150–290%

75–150 m

Gyroscope

6x

80–250%

150–200 m

Gyroscope

8x

50–200%

DMR and sniper work

Gyroscope ADS

Red Dot

365–375%

Close-range spray

Gyroscope ADS

2x

350–400%

50–100 m

Gyroscope ADS

3x

260–275%

50–100 m

Gyroscope ADS

8x

55–90%

Long-range micro-adjustment

Two rules make those numbers usable. First, ADS falls as magnification rises, because a 6x amplifies every thumb movement; low ADS is what keeps a spray stable, while ADS that is too fast forces constant over-correction. Second, gyro sits well above the ADS value on the same scope, because tilt has to cover the same recoil with a much smaller physical input.

The 2x and 3x overlap on purpose. Both cover the 50–100 m band, so pick the one your loot actually gives you and set them within a few points of each other. The 4x owns 75–150 m, and the 6x is for tapping at 150–200 m rather than spraying.

The gyro ranges are the widest in the table, and that is not noise. A 6x gyro value of 80 and a value of 250 can both be correct on different phones, because the physical tilt needed depends on how you hold the device. Do not mix values from one table into another panel — set a range, then move in 5 to 10 point steps.

Device classSensitivity approachGyro mode

Flagship, 120 Hz and 8 GB or more

Top of each range

Always On once trained

Mid-range, 90 Hz

Middle of each range

Activate the scope

Entry, 60 Hz and 3–4 GB

Bottom of each range, no-scope gyro 250–280%

Activate the scope

What Not to Change: Config Files and GFX Tools

Every few months a video resurfaces showing how to edit a configuration file to unlock 90 fps on a phone that does not support it. That route is closed, and it was never safe: config edits and third-party graphics tools are detected by the anti-cheat, and the penalties run from long suspensions to permanent bans. The same applies to any app that claims to change resolution, unlock presets or "optimise" the game for you.

The legitimate version of that advice is boring: lower the preset, lower the tier, and let the game run inside its own limits.

Latency and Input Response

  • Match the tier to the panel. Running the 120 tier on a 60 Hz screen adds heat and drops frames without showing you a single extra frame.
  • Consistency beats peak. Watch your slowest frames, not your best ones. A setup that holds a flat 60 feels better than one that swings between 90 and 55.
  • Heat is a latency problem. Once the phone throttles, input feels late even though your settings have not changed. Take the case off, avoid charging while playing, and consider dropping one preset in long sessions.
  • Keep gyro on Scope On while you learn. Accidental tilt during rotation is the most common reason new gyro players give up.

System and Driver Tweaks

  • Use the phone's performance mode. Every major Android skin has one; it changes scheduling and is fully reversible.
  • Close background apps before a session. Chat apps and update services steal CPU time that the game needs for frame pacing.
  • Keep 10% or more storage free. A full drive slows asset streaming and shows up as stutter when you land.
  • Update the game through the store only. Sideloaded builds and modded APKs are the fastest route to a ban.
  • Recheck your preset after every major update. Version changes have moved performance around before, and the 2024 line is no exception.

How to Test Your Settings

  1. Pick one fixed test: the same training ground wall, the same spray, the same distance.
  2. Record your average frame rate and your 1% low — the average of your slowest 1% of frames — before changing anything.
  3. Drop graphics and frame rate to the minimum and note the ceiling. That number is your phone's real headroom.
  4. Raise one setting at a time, keeping the frame time flat. Shadows and style first, preset last.
  5. Spend at least 20 matches on a sensitivity range before judging it, and change values in 5 to 10 point steps.
Display refresh rateTarget

60 Hz

Locked 60 fps

90 Hz

90 fps, or 60 if the phone cannot hold it

120 Hz and above

120 fps on supported devices, otherwise the highest stable tier

The end state is not a copied preset. It is a setup where the frame rate does not move when a squad pushes you, and where your crosshair lands where your thumb expects it to.

More games to download