CHICHOO VALORANT Settings 2025: Sensitivity, Crosshair
CHICHOO's VALORANT setup as recorded in 2025: 800 DPI with 0.21 or 0.2 in-game sensitivity (160-168 eDPI), a cyan crosshair with a paste-ready profile code, 1280x960 4:3 video settings with every quality slider on Low, his minimap values and the skins listed in public tracking. Every value carries the reason behind it, the conflicting reports are flagged instead of hidden, and there are separate recommendations for low-end and high-refresh machines.
VALORANT has moved to Unreal Engine 5.3 as of Patch 11.02, and it still renders through DirectX 11 only — there is no DX12 or Vulkan switch you can flip to buy frames. What you get instead is a short list of toggles where every bit of GPU headroom is either spent on clarity or wasted on effects that hide the enemy. CHICHOO's setup is that trade taken to its logical end: four quality sliders on Low, one anti-aliasing setting left on, a stretched 4:3 resolution, and a crosshair you can paste in ten seconds.
1. Quick Settings Cheat Sheet
2. Understanding VALORANT's Performance
The engine change matters less than it sounds. Patch 11.02 replaced Unreal Engine 4.27 with 5.3, but the renderer still targets DirectX 11 (D3D11) and there is no in-game option for DX12 or Vulkan. So the old advice about swapping APIs does not apply here, and neither do the launch-parameter tricks people copy from other shooters.
The official hardware tiers tell you where the wall is:
- On the minimum tier the GPU is the ceiling. Integrated graphics like the HD 4000 cannot hold 30 FPS once anti-aliasing and shadows are on, so those are the first things to go.
- On the 144 FPS tier, the CPU is the more likely limiter. The listed GPU for that tier is a GTX 1050 Ti-class card, which is light work for a modern shooter at low settings, while the paired six-core CPUs are the entry point, not a fast pairing.
- Frames disappear in crowded fights. Multiple ability effects layered on screen push draw calls and particle work up at exactly the moment you need stable frame times. Settings that add extra layers — shadows, distortion, high material quality — make that spike worse.
- 4 GB of RAM is the published floor. Chat and browser tabs are not part of that budget, so close them before blaming the game.
Practical tiers for this article: a low-end build is anything on integrated graphics or a pre-2015 GPU; mid is a 60 Hz machine with a modern entry GPU; high is a 144 Hz or faster display with a card from the last few generations. If you are not sure, start at the Low column in the next table and walk settings up one at a time.
3. Best Video Settings
Lower everything that adds layers, then spend the savings on one anti-aliasing pass and full resolution for your aspect ratio. That is exactly what CHICHOO's values do, with one surprise: Bloom stays on.
Pro Tip: the easiest mistake with this table is switching Aspect Ratio Method to Letterbox "to fix the stretch". Fill is the point of 1280x960 on a 16:9 panel — letterboxing gives you a small 4:3 box in the middle of the screen and throws away the wider targets you came for. If the stretch genuinely bothers you, drop the 4:3 idea and play native 16:9 instead.
4. Key Setting Deep Dives
Resolution and Aspect Ratio: What 1280x960 Actually Does
Resolution sets how many pixels the GPU shades per frame; aspect ratio sets how those pixels map onto your monitor. 1280x960 at 4:3 is 1.23 million pixels, roughly 40 percent fewer than 1920x1080, which is why the frame-time saving is immediate and why it is the first thing to change on weak hardware.
The stretch is the part people copy without understanding. With Fill, a 4:3 image is scaled horizontally to cover a 16:9 screen, so everything looks wider — including players peeking a corner. You are not seeing more of the map; you are seeing a distorted, larger version of the same slice. That trade is a preference, not an upgrade.
- Mid and high tier: try 1280x960 Fill for a week. If tracking feels odd, return to native and keep the other low settings.
- Low tier: 1280x960 or even lower is the biggest single win available; do this before touching anti-aliasing.
- Troubleshooting: if the HUD or crosshair looks blurry after the switch, you are seeing the scaler, not a broken config. Native resolution is the fix if it bothers you.
Anti-Aliasing: MSAA 4x Is Not Free
MSAA samples geometry edges several times per pixel, which is why it cleans up stair-stepping on railings and door frames better than any post-process filter. It is also the most expensive option in this menu after resolution, because the cost scales with both sample count and pixel count.
His 4x only works because everything else is already Low: at 1280x960 the pixel count is low enough that four samples stay affordable. Copy the number without copying the resolution and you pay for it.
- GTX 1050 Ti-class and above: MSAA 4x is reasonable at 1280x960.
- Integrated graphics or 60 Hz budget builds: MSAA 2x, or None if frame times still spike in fights.
- Troubleshooting: if you see shimmering on thin geometry after dropping to None, anisotropic filtering at 4x is not the culprit — it is the missing edge samples. Accept it or go back to 2x.
Improve Clarity, Bloom and Sharpening: Pick by Eye, Not by Reputation
These three are the settings where his config and mainstream guides disagree. He runs Improve Clarity Off, Experimental Sharpening Off and Bloom On; the usual competitive advice is the inverse — Clarity On, Bloom Off.
Clarity sharpens the final image at close to no frame cost, but sharpening adds bright halos along high-contrast edges, and some players find those halos more distracting than soft edges. Experimental Sharpening stacks a second pass on top and usually makes the artifacts worse. Bloom adds glow around bright sources: muzzle flash, ability effects, sky. It can wash out an area during a fight, or it can make tracers easier to read — that one is genuinely personal.
Test all three in the Range against a wall and a distant bot, not in a ranked match. What you are looking for is whether a distant head is easier to pick out, not whether the screenshot looks nicer.
5. Controls, Crosshair and Minimap Settings
Mouse and Sensitivity
Two caveats before you copy the numbers. First, the 0.21 and 0.2 figures are separate submissions made months apart, not a typo, and a 0.22 report also appears in community notes — the practical spread is 160 to 176 eDPI. Second, a different public listing records 1600 DPI at 0.1, which is the same 160 eDPI. If your mouse feels coarse at 800 DPI, that pairing is the equivalent swap.
His 2025 peripheral list pairs this with a Logitech G Pro X Superlight 2, a Wooting 60HE, an Artisan Ninja FX Zero pad and a BenQ XL2546K monitor. Newer listings have already moved on to a different mouse, which is a good reminder that the sensitivity number outlives the hardware.
Crosshair
The profile code below matches the length-3 version. Paste it in the Crosshair tab, then confirm the preview shows cyan with no outline.
Crosshair profile code, inner line length 3
A second, longer code that produces a length-4 crosshair is also in circulation. It is a different profile, not an edit of this one — do not paste segments from both into the same field. If the first code renders thicker than the preview above, you are almost certainly on the length-4 profile.
Minimap
6. Launch Options and Config Files: What to Skip
There is no supported set of launch options for this game, and no config edit worth the risk. VALORANT runs under Vanguard, the kernel-level anti-cheat, so anything that touches game files or injects into the process is a bad trade at best and a ban at worst.
Skip the old -dx12, -high, -novid style flags you may remember from other shooters: the renderer is DirectX 11 only, so an API override has nothing to switch to. Skip third-party "optimizer" tools entirely. Every frame you can legitimately get is already sitting in the settings menu above, and those changes are reversible with one click.
Back up before you experiment. If you keep a written copy of your current sensitivity, resolution and crosshair code, you can always walk back a bad afternoon of testing.
7. Latency and Input Optimization
- NVIDIA Reflex: On + Boost. It shortens the render queue so the frame you see is closer to the frame the server knows about. Boost holds clocks up between rounds. If your card is older and the option is missing, skip it — there is no equivalent toggle to invent.
- VSync: Off. VSync holds frames back to match refresh, adding latency. If screen tearing genuinely bothers you, a VRR display is the better fix than VSync.
- Polling rate: 1000 Hz. Higher figures are reported for some setups, but 1000 Hz is the safe common denominator and keeps CPU overhead predictable.
- Frame cap: at or just under your refresh rate. An uncapped framerate produces uneven frame times that feel worse than a steady lower number. 144 Hz display, cap at 144.
- Display mode: Fullscreen. Windowed modes route frames through the desktop compositor and pick up stutter from anything else drawing on screen.
- Refresh rate: set it in Windows first. The game cannot run at 144 Hz if the desktop is still on 60 Hz.
8. System and Driver Tweaks
- Set the monitor to its real refresh rate in Windows display settings, then verify in game. This is the single most common "my frames are high but it feels slow" cause.
- Use the driver's default 3D profile for VALORANT. Forcing anti-aliasing or anisotropic filtering from the control panel overrides the in-game values and makes your testing meaningless.
- Keep the GPU driver reasonably current, but do not update mid-tournament. Driver updates fix crashes and add support for new cards; they rarely add frames here.
- Close overlays, capture software and browser hardware acceleration. They compete for the same GPU and add frame-time spikes exactly when effects fill the screen.
- Run the game from an SSD and leave the page file on automatic. These are low-risk, reversible settings; anything that asks you to disable security features or edit the registry is not worth it.
- Use a high-performance power plan on laptops. On battery, clocks drop and no in-game setting compensates.
9. How to Test Your Settings
- Pick one map and one repeatable spot — a Range lane or a custom-game angle you know well.
- Record your current average FPS and your 1% Low. The 1% Low is the slowest 1 percent of frames, and it is what you actually feel during fights.
- Drop every setting to its lowest value and measure again. That number is your hardware ceiling, not a target.
- Raise one setting at a time, retest, and keep it only if the frame cost is small and you can see the difference.
- Change sensitivity and crosshair last, once frame times are stable. Aim changes made on a stuttering build are worthless data.
- Give any change a full session before judging it. Ten minutes in the Range tells you almost nothing about tracking.
Targets worth aiming for: a 60 Hz display needs a locked 60 with a 1% Low close to it; a 144 Hz display wants 120 to 144; a 240 Hz display wants 200 or more before the refresh rate stops paying for itself.
10. Weapon Skins in the Public Setup
This list is a compiled snapshot from public tracking, not a claim about what he uses every match. Skins have no effect on performance, hit registration or visibility of the weapon model beyond cosmetic differences.
Is CHICHOO's sensitivity 0.2 or 0.21?
Both appear in public tracking, from different dates. At 800 DPI they work out to 160 and 168 eDPI, and a 0.22 report also exists in community notes. Pick whichever feels stable and stop chasing the last digit.
Does the crosshair code still work in 2025?
The length-3 profile code is consistent across several independent listings. Paste it in the Crosshair tab and check the preview: cyan, no outline, no center dot, thin inner lines.
Should I copy the 1280x960 resolution?
Only if you want the stretched image and the extra frame time. It is the biggest performance lever in the menu, but the 4:3 stretch is a preference, not an advantage.
Will copying a pro setup make me better?
No. Settings remove obstacles; they do not add aim. Copy the low quality settings, set a sensitivity near 160 to 168 eDPI, and spend the time you saved on aim practice.
